What are 10 ways to fix one AirPod that dies faster?

What are 10 ways to fix one AirPod that dies faster?

What are 10 ways to fix one AirPod that dies faster?

AirPods are an integral part of staying connected to music, podcasts, audiobooks, and more. But when one AirPod dies faster than the other, tune-out time becomes a big problem. If this issue has been plaguing you, fear not: there are numerous ways to fix the AirPod that runs out juice much sooner than its partner! The first solution is to check the battery life of both AirPods with your iPhone or iPad and make sure that they’re both working as expected. If all else fails, try taking a look around your house to make sure your AirPod hasn’t gone on a little expedition of his own! Of course, if this still doesn’t solve your AirPod dilemma then perhaps it’s time for a visit back to Apple so they can help remedy your audial fiasco. With these 10 foolproof tips for fixing AirPods that die before their time, shoddy sound quality will soon be nothing more than a distant memory!
Apple AirPods | Best Buy Canada
What are 10 ways to fix one AirPod that dies faster?

Here are ten potential ways to fix an AirPod that dies faster than the other:

  1. Check the battery level: Make sure that the AirPod with the shorter battery life is actually running out of power faster than the other. You can check the battery level of each AirPod by opening the charging case near your iPhone, iPad, or iPod touch and looking at the battery level indicator.
  2. Clean the AirPods: If the AirPods are dirty or covered in debris, this could cause them to drain the battery faster. Try cleaning the AirPods with a soft, dry cloth, or using a toothbrush to gently brush away any dirt or debris.
  3. Reset the AirPods: If the AirPods are not functioning correctly, resetting them may help to fix the problem. To reset the AirPods, follow these steps:
  • Place both AirPods in the charging case.
  • Close the lid.
  • Press and hold the setup button on the back of the case for at least 15 seconds, until the status light starts flashing amber.
  • Open the lid and then press and hold the setup button again until the status light flashes white.
  1. Check for updates: Make sure that you have the latest version of iOS on your device, and that your AirPods are up to date. To check for updates, go to the “Settings” app on your device, tap “General,” and then tap “Software Update.”1. Open the Settings app on your iPhone.

    2. Tap Bluetooth.

    3. Find the AirPods and tap the on the right.

    4. In the About section, check Version – that’s the current firmware version you’re on.

    5. Check the Apple support page for the latest AirPods firmware version that your earbuds need to have.

    6. If your AirPods need an update, put them in their charging case, start charging them (either with a Lightning cable or wirelessly), and place them next to your iPhone.

    Now your AirPods should update after a short while, and you can check if both are discharing at the same rate or not.

  2. Use the AirPods with only one device: If you are using the AirPods with multiple devices, try using them with just one device to see if that helps to fix the problem.
  3. Check the charging case: Make sure that the charging case is working correctly and that the charging port is clean. If the charging case is damaged or not functioning properly, it could be causing the AirPods to drain the battery faster.
  4. Check the AirPod settings: If you have changed any settings on the AirPods, such as the volume or microphone sensitivity, this could be affecting the battery life. Try resetting the settings to the default values to see if that helps.Here’s how to adjust your AirPods settings.

    1. Begin by wearing your AirPods.

    2. Open the Settings app on your iPhone.

    3. Tap Bluetooth.

    The Settings app on iPhone, with the "Bluetooth" option highlighted.
    What are 10 ways to fix one AirPod that dies faster?

    4. Find the AirPods and tap the on the right.

    5. Then adjust the Left and Right functions in the Double-Tap On AirPod section.

    The AirPods details page in the Bluetooth settings screen on iPhone, with the "Left" and "Right" options highlighted in the "Double-Tap On AirPod" section highlighted.
    What are 10 ways to fix one AirPod that dies faster?
  5. Check for water damage: If the AirPods have been exposed to water, this could be causing the battery to drain faster. Try letting the AirPods dry out completely before using them again.
  6. Check for software conflicts: If you have installed any third-party software or apps that could be causing conflicts with the AirPods, try uninstalling these and see if that helps to fix the problem.
  7. Contact Apple support: If none of the above solutions work, you may want to contact Apple support for further assistance. They may be able to help diagnose the problem and provide additional solutions.
  8. The AirPods case is damaged on one sideIt could be that the AirPod that dies faster is completely fine, but it just isn’t getting enough charge because its side of the charging case is damaged. Again, all you have to do is get in touch with Apple support and schedule a repair or replacement.
  9. The AirPods might benefit from being fully drained and then rechargedIt’s a good idea to get into the habit of charging your AirPods before they completely drain because this will generally extend their battery life. However, if you have one AirPod that regularly dies before the other, you might want to “hack” the battery of both earbuds by completely draining them, and then giving them a full recharge.

References: 

1- https://www.businessinsider.com/guides/tech/why-does-one-airpod-die-faster

Smartphone 101 – Pick a smartphone for me – android or iOS – Apple iPhone or Samsung Galaxy or Huawei or Xaomi or Google Pixel

How AI is Impacting Smartphone Longevity – Best Smartphones 2023

macOS Stuck on Checking for Updates? 4 Solutions

macOS Stuck on Checking for Updates? 4 Solutions

 

macOS Stuck on Checking for Updates? 4 Solutions

Users often experience failure when updating macOS to the latest version. Usually, you never find difficulties updating the operating system on your Mac, but sometimes the process takes longer than usual. When your macOS stuck on checking for updates, you will see a spinning wheel or a freezing screen indicating that the update process is not responding. 

If you are stuck on the same screen, there is a problem, and you need to fix it to proceed further. Updating your computer is important as it assures that the Mac is running smoothly. The updates come with security patches that keep the computer secure from online threats. The following solutions will help you get rid of the problem efficiently. 

First, try restarting your Mac. This will sometimes clear up any stuck processes and allow the update to continue. If that doesn’t work, you can try resetting the Mac’s NVRAM. This will help to clear any corrupt data that may be causing the update to get stuck.

Finally, if neither of those solutions works, follow the steps below:

Let’s first discuss the reasons that might be causing the “Checking for updates…” error. 

Reasons for “Checking for updates” Error: 

A couple of reasons can be responsible for the freezing screen resulting from a stuck macOS update. Some of these reasons include the following:

  • Unstable or slow internet connection
  • Third-party software conflict
  • Unresponsive Apple server
  • Lack of storage space on Mac
  • Any internal issue interfering with the update

Let’s now discuss the ways to resolve the macOS update-related issues.  

Ways to Fix “Checking for Updates” on macOS

macOS Stuck on Checking for Updates? 4 Solutions
macOS Stuck on Checking for Updates? 4 Solutions

Before you initiate any of the given solutions to fix the persisting problem, make sure you have a backup of data stored on the computer. Sometimes, the problem occurs because you might not be following the update process correctly. 

New users must learn about updating the Mac operating system before initiating the process. For a detailed guide on downloading and installing macOS, visit https://setapp.com/how-to/download-and-install-old-mac-os-versions

Some of the resolution procedures to fix macOS stuck on checking for updates errors are easy, while others demand sound technical knowledge. 

Check Your Internet Connection

As mentioned above, poor internet connection can be the most common reason for freezing updates windows on macOS. Check if your internet is running fast and if you are getting the right bandwidth. Else, your computer will fail to reach the update server, and you will not be able to download the update-related files. 

Check your router to ensure you are getting internet signals appropriately. Reset your router by turning it off and then on after waiting for 20 seconds. You can also try to reset network settings for more advanced resolution. Before you reset your network settings, disable the antivirus software first. 

Check Storage Space

macOS update files can be big, so make sure you have sufficient space available to accommodate these updates. To check the storage on your Mac computer, navigate to the Apple menu, click About This Mac, and tap on the Storage tab. You can identify the files that are no longer needed and remove them from the storage media. 

Some of the apps stored on your computer consume significant system resources while doing nothing. So, make sure to delete these apps to make space on the Mac storage media. While deleting apps manually is cost-effective, professional app uninstallers can help delete app-associated files completely from the computer.  

Check Apple Server 

Implementing this solution is possible only if the internet is running smoothly. On facing the “Checking for updates” error, you need to check that no outage exists on Apple’s side. If the Apple server is experiencing downtime, you can check this by visiting the Apple System Status page and clicking the macOS Software Update option. 

If a green icon is displayed next to the macOS Software Update, it indicates that there is no outage. If there is a problem with Apple Server, you will see a red dot displayed with all the options on the System Status page. You can also check your internet speed before checking the server status to ensure the smooth running of the process. 

Boot Mac in Safe Mode

macOS Stuck on Checking for Updates? 4 Solutions
macOS Stuck on Checking for Updates? 4 Solutions

Restarting your Mac computer can fix major issues, so it is recommended that you must do it once before initiating any other workaround. If a restart doesn’t solve the problem, boot your computer in Safe Mode. Running your Mac in Safe Mode, also known as diagnostics mode, will clear all the cache files and check the system. 

If the Mac updates install successfully in Safe Mode, restart the computer and continue using it normally. On the other hand, if you still see macOS checking for updates errors, try to update your Mac again. It is worth mentioning the procedure to enter Safe Mode differs in Intel and Silicon-based Macs, so keep that in mind. 

Conclusion 

Updating the Mac is easy unless your computer is in good condition, the internet is working properly and there’s enough storage space available for macOS update files. Once you face any issue, the process becomes cumbersome. 

Apart from the above mentioned fixes, you can try deleting macOS install data and resetting the Software Update preferences to check if these procedures can solve the problem.

Why can’t a macOs be installed in a Windows computer?

Laptop 101 – Pick a laptop for me – MacOS or Windows or Chrome – Apple MacBook or Google ChromeBook or Microsoft Surface or Dell or HP or Lenovo

Smartphone 101 – Pick a smartphone for me – android or iOS – Apple iPhone or Samsung Galaxy or Huawei or Xaomi or Google Pixel


AI Unraveled: Demystifying Frequently Asked Questions on Artificial Intelligence (OpenAI, ChatGPT, Google Gemini, Generative AI, Discriminative AI, xAI, LLMs, GPUs, Machine Learning, NLP, Promp Engineering)